Buy Small Metal Lathe

Grizzly G8688 7″ x 12″ Mini Metal Lathe

Powered by a 3/4 HP motor, this lathe also features: variable speeds (0-2500RPM), inch and metric reading dials, turret tool post, chip tray and splash guard.

• Distance between centers: 12″
• Motor: 3/4 HP, 110V
• Speed range: Low Range: 0-1100 RPM, High Range: 0-2500 RPM
• Spindle bore: 20mm
• Swing over bed: 7″

Rating: (out of 2 reviews)

List Price: $ 575.00
Price: $ 495.00

Grizzly G8688 7″ x 12″ Mini Metal Lathe Reviews

Review by Robotster:

I have been interested in buying a lathe for hobby work and have done research and talked to people about their experiences. I was convinced that the Grizzly was the best choice for a few reasons. Basically, the level of quality in all of the lathes in this category is about the same since they are all manufactured in China by just a couple of manufacturers, so this was a wash in terms of which brand to choose. It came down to features, included accessories and convenience. The desirable features on this unit were the wider bed for work on longer pieces and the variable speed motor control. Being new to a tool like this, the fact that different materials require different cutting speeds would require gear changes on lathes without the speed adjustment. The ability to slowly bring a piece of work up to the proper speed is also important to a novice (like me) to determine if the work is mounted and centered properly on the chuck. The Grizzly box arrived in pristine condition, but that did not indicate a damage free shipment as the drip tray was bent in shipment. One call to the customer service group at Grizzly solved this by way of a new tray sent to arrive in just a couple of days. Nice, helpful people at Grizzly – this will be a strong point the next time I shop for a tool. I have turned a few items on the lathe already, and all seems fine. The slides have very little play and the chuck centers properly with almost no run-out. If you are new to this hobby, you will find the web site very helpful. They have an abundance of great info for the beginner and intermediate machinist. The fact that they had an in depth review and adjustment and set up pointers specifically for this lathe really made my selection a lot easier. Be ready to buy additional accessories to get up and running. A live center and a steady rest were included, but cutting tools and a Jacobs chuck are required items not included in the box.

Buy Grizzly G8688 7″ x 12″ Mini Metal Lathe now for only $ 495.00!

Spindles: Comprehensive Guide to Making Light Milling or Grinding Spindles with a Small Lathe (Workshop Practice Series)

With the model and amateur engineer in mind, this is a guide to making light milling or grinding spindles with a small lathe. Spindles come in many shapes and sizes, depending on their use and included here are descriptions of the design, construction and use of a variety of types (from 19.05 – 57.15mm/0.75 – 2.25 inch) for grinding, milling and drilling. The emphasis is on spindles which are easy to make and have as few parts as possible – all but one use sealed ball bearings. The author is a designer, machinist and woodworker whose interest in clock making led him to design and build the spindles in the book. Also included is a light gear cutting frame for clock makers.

Rating: (out of 1 reviews)

Price: $ 44.99

Building a Small Steam Engine (DVD)

Build your own speedy little horizontal steam engine from Rudy’s plans and description. Rudy does it all on a little Sherline lathe and mill. Plans and outline are included

Price: $ 87.60

SHOP FOX M1016 10-Inch by 20-Inch Metal Lathe

An excellent small-sized lathe with an impressive 9-3/4″ swing and 21″ distance between centers, the Model M1016 offers a whole gang of handy accessories like 5″ 3- and 4-jaw chucks, 8-1/2″ faceplate, 4-way turret tool post, quick change tool post, quick change collet set, and more.

• Cross slide table
• 11 change gears
• 2 dead centers
• 4-way turret tool post
• Eye shield

List Price: $ 1,530.00
Price: $ 1,199.00

Bolton 7 X 12 Mini Lathe Is Small Yet Powerful Use with Metal, Plastic or Wood Mt#2 Tailstock Taper 3/4 Hp 110 Volt Comes with Standard Accessories and Full 1 Year Warrantty

Lathe Specifications:
Distance between centers: 12″; Swing over bed: 7″
Dial Calibration on Leadscrew: 0.002″
Headstock Taper: MT3#; Lathe Chuck Mount: Bolt-On.
Spindle Bore: 4/5″; Spindle Speeds: RPM.
Swing over work table: 3-3/4″; Number of thread pitches: 18.
Tailstock Taper: MT2#; Spindle nose taper: MT #3.
Tailstock quill Travel.
Electrical Specifications:
Horsepower: 2/5 hp;Voltage:110 Volts.
Motor Type A/C; Phase: Single.

• 3/4 hp motor 110 volt
• 3/4″ spindle bore Mt#2 drill chuck

Rating: (out of 1 reviews)

List Price: $ 799.00
Price: $ 578.00

Bolton 7 X 12 Mini Lathe Is Small Yet Powerful Use with Metal, Plastic or Wood Mt#2 Tailstock Taper 3/4 Hp 110 Volt Comes with Standard Accessories and Full 1 Year Warrantty Reviews

Buy Bolton 7 X 12 Mini Lathe Is Small Yet Powerful Use with Metal, Plastic or Wood Mt#2 Tailstock Taper 3/4 Hp 110 Volt Comes with Standard Accessories and Full 1 Year Warrantty now for only $ 578.00!

Consider L:D when choosing a lathe for small parts.(Rapid Traverse): An article from: Modern Machine Shop

This digital document is an article from Modern Machine Shop, published by Thomson Gale on December 1, 2007. The length of the article is 629 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available in your Amazon.com Digital Locker immediately after purchase. You can view it with any web browser.

Citation Details
Title: Consider L:D when choosing a lathe for small parts.(Rapid Traverse)
Author: Christina Bramlet
Publication: Modern Machine Shop (Magazine/Journal)
Date: December 1, 2007
Publisher: Thomson Gale
Volume: 80 Issue: 7 Page: 56(2)

Distributed by Thomson Gale

List Price: $ 9.95
Price: $ 9.95