Explanation: Cutting Threads on My Metal Lathe
Cool video about lathe cutting, take a look: Here I describe in detail the steps I took to cut threads in an aluminum rod on my metal lathe. I was creating a tool holder to hold a small Dremel chuck, meaning that I had to duplicate the shaft of a Dremel tool on my own [...]
Hendey T&G Lathe, cutting the base of a bevel gear blank
Cool video about lathe cutting, take a look: Cutting the base of a Bevel gear blank (must be very flat), on a Hendey tool & gagemakers lathe. The blank is held in a 3 jaw cushman chuck, & supported by the steady rest. The lathe speed is running about 300 rpm (in 2nd back gear), [...]
Is collet chuck of cnc lathe cutting machine need to do any protection when empty run or spindle turn?
Chuck at our cnc machine is use to hold the product and turn for cutting. Thus, there is nothing in chuck when machine is stop. Can any one tell me that the accuracy of machine can be effect or not when the spindle is turning without chucking. Is it need to insert any dummy work [...]
Lathe cutting plexiglass disc
Cool video about lathe cutting, take a look: Doing some work with my TB-320 lathe- at this time cutting 2cm thick plexiglass disc. Plexiglass chips really looks like a thin thread.
myford lathe cutting using power feed.wmv
Cool video about lathe cutting, take a look:
Hendey T&G Lathe, cutting the base of a bevel gear blank
Cool video about lathe cutting, take a look: Cutting the base of a Bevel gear blank (must be very flat), on a Hendey tool & gagemakers lathe. The blank is held in a 3 jaw cushman chuck, & supported by the steady rest. The lathe speed is running about 300 rpm (in 2nd back gear), [...]
How to Use a Wood Lathe : Cutting Curves With Wood Lathe
Cool video about lathe cutting, take a look: Cutting out the ornamental beads for wood lathe project. Learn to make furniture like a pro in this free woodworking lesson.
HAAS SL-20 CNC Lathe (Cutting 12L14)
Cool video about lathe cutting, take a look: Usually has coolant but material is soft so I ran one piece to show everyone. Material is 3/4″ dia x 4′ long bar and machine uses a bar puller to make 14 pieces each run.
CNC lathe cutting a point on rebar stake
Cool video about lathe cutting, take a look: Making a batch of rebar stakes with sharp ends.
Victor lathe cutting 316SS
Cool video about lathe cutting, take a look: A 1980′s vintage Victor 1640 (Taiwan) lathe cutting about a 1″ (25mm) diameter at 1200rpm, .080″ (2mm) depth of cut at .0118″ (0.3mm) per rev feed. Insert is Valenite CNMG432 M6 grade 8525. This is just a short portion of the whole job.
