Combo Lathe /Mill Drill 12″ X 30″ , Seperate Lathe & Mill Motors 3/4 Hp Each,110v or 220v Similiar Machines Don’t Allow for Usage of Both Lathe & Mill Operation At the Same Time,
Combo Lathe Mill Drill 12″ x 30″ , seperate lathe & mill motors 3/4 hp each,110v or 220v
1″ spindle bore, 6 lathe speeds , 9 mill speeds,11-40 TPI,
8 1/2″ cross slide travel , low tolerance
Product DescriptionCombo Lathe Mill 12″ x 30″ , seperate lathe & mill motors 3/4 hp each,110v or 220v,1″ spindle bore, 6 [...]
12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value !
Geared Combination Lathe/Mill drill , precision & accuracy on this large 12″ swing over bed, 30″ distance between centers, 12 speeds 75-1900 RPM , 1 1/2″ spindle bore
Product DescriptionSpindle Bore: 1-1/2″
Spindle Speeds:12 (60-1600 RPM/50Hz) or (75-1900RPM/60Hz)
Swing over work table: 6-7/10″
Thread pitch on processing: 9-48 1/n”
Thread kinds on processing: 23.
Tailstock Taper: MT3#
X-Axis Working Travel:23-3/5″
Y-Axis Working Travel: [...]
12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value !
Geared Combination Lathe/Mill drill , precision & accuracy on this large 12″ swing over bed, 30″ distance between centers, 12 speeds 75-1900 RPM , 1 1/2″ spindle bore
Product DescriptionSpindle Bore: 1-1/2″
Spindle Speeds:12 (60-1600 RPM/50Hz) or (75-1900RPM/60Hz)
Swing over work table: 6-7/10″
Thread pitch on processing: 9-48 1/n”
Thread kinds on processing: 23.
Tailstock Taper: MT3#
X-Axis Working Travel:23-3/5″
Y-Axis Working Travel: [...]
12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value !
Geared Combination Lathe/Mill drill , precision & accuracy on this large 12″ swing over bed, 30″ distance between centers, 12 speeds 75-1900 RPM , 1 1/2″ spindle bore
Product DescriptionSpindle Bore: 1-1/2″
Spindle Speeds:12 (60-1600 RPM/50Hz) or (75-1900RPM/60Hz)
Swing over work table: 6-7/10″
Thread pitch on processing: 9-48 1/n”
Thread kinds on processing: 23.
Tailstock Taper: MT3#
X-Axis Working Travel:23-3/5″
Y-Axis Working Travel: [...]
