Bolton 12″ X 30″ Gear Driven Combo Lathe Now Comes Complete with Cooling System Installed, Seperate 1 1/2 Hp Lathe & 3/4 Hp Mill Motors, 110 or 220 Set Up,ships with Stand, Standard Acessories & Full 1 Year Manufacturers Warranty
Apron features Power Cross and Longitudinal Feed with Lever Control
Our thread dial also makes threading effortless
T-slot allows for clamping your workpiece or mounting a vice
5-48 TPI, 6 1/4″ cross slide travel , low tolerance!
Mill Head Tilts Left, Right and 90 Degrees,
Product DescriptionGeared Combo Lathe/Mill Drill 12″ x 30″ ,1 1/2″ hp lathe motor & 3/4 [...]
Bolton 12 X 24 Lathe ,No Constant Set up Simply Shift Gears 75-1900 Rpm’s, 1 1/2 Spindle Bore, 9-48 Tpi and 0.5-4 Mm , Horizontal and Vertical Power Feed,110 or Convert to 220volt, Standard Accessories and Full 1 Year Warranty
Manufacturer direct savings, Our CQ9332 12″ swing over, 23″ distance between centers,
12 speeds from 75-1900 rpm,9-48 TPI,
0.5-4mm,110v or 220v capacity, 1 hp,geared lathe,
1 1/2″ spindle bore, MT#3,
Brand new and ready to ship today
Product DescriptionTime is money and with this machine you’ll never miss a beat, no constant set up, just simply shift gears. Packed with features [...]
12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value !
Geared Combination Lathe/Mill drill , precision & accuracy on this large 12″ swing over bed, 30″ distance between centers, 12 speeds 75-1900 RPM , 1 1/2″ spindle bore
Product DescriptionSpindle Bore: 1-1/2″
Spindle Speeds:12 (60-1600 RPM/50Hz) or (75-1900RPM/60Hz)
Swing over work table: 6-7/10″
Thread pitch on processing: 9-48 1/n”
Thread kinds on processing: 23.
Tailstock Taper: MT3#
X-Axis Working Travel:23-3/5″
Y-Axis Working Travel: [...]
12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value !
Geared Combination Lathe/Mill drill , precision & accuracy on this large 12″ swing over bed, 30″ distance between centers, 12 speeds 75-1900 RPM , 1 1/2″ spindle bore
Product DescriptionSpindle Bore: 1-1/2″
Spindle Speeds:12 (60-1600 RPM/50Hz) or (75-1900RPM/60Hz)
Swing over work table: 6-7/10″
Thread pitch on processing: 9-48 1/n”
Thread kinds on processing: 23.
Tailstock Taper: MT3#
X-Axis Working Travel:23-3/5″
Y-Axis Working Travel: [...]
12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value !
Geared Combination Lathe/Mill drill , precision & accuracy on this large 12″ swing over bed, 30″ distance between centers, 12 speeds 75-1900 RPM , 1 1/2″ spindle bore
Product DescriptionSpindle Bore: 1-1/2″
Spindle Speeds:12 (60-1600 RPM/50Hz) or (75-1900RPM/60Hz)
Swing over work table: 6-7/10″
Thread pitch on processing: 9-48 1/n”
Thread kinds on processing: 23.
Tailstock Taper: MT3#
X-Axis Working Travel:23-3/5″
Y-Axis Working Travel: [...]
