Used Metal Lathes at AMAZING Discounts! » Gear http://usedmetallathe.net Great Prices on All Types & Models of Used Metal Lathes Wed, 16 May 2012 17:35:52 +0000 en hourly 1 http://wordpress.org/?v=3.1.2 Hendey T&G Lathe, cutting the base of a bevel gear blank http://usedmetallathe.net/hendey-tg-lathe-cutting-the-base-of-a-bevel-gear-blank-4 http://usedmetallathe.net/hendey-tg-lathe-cutting-the-base-of-a-bevel-gear-blank-4#comments Fri, 20 Apr 2012 18:08:22 +0000 http://usedmetallathe.net/hendey-tg-lathe-cutting-the-base-of-a-bevel-gear-blank-4 Cool video about lathe cutting, take a look: Cutting the base of a Bevel gear blank (must be very flat), on a Hendey tool & gagemakers lathe. The blank is held in a 3 jaw cushman chuck, & supported by the steady rest. The lathe speed is running about 300 rpm (in 2nd back gear), [...]]]>
Cool video about lathe cutting, take a look:


Cutting the base of a Bevel gear blank (must be very flat), on a Hendey tool & gagemakers lathe. The blank is held in a 3 jaw cushman chuck, & supported by the steady rest. The lathe speed is running about 300 rpm (in 2nd back gear), with a crossfeed of .001 (set to .002, but in belt drive, which is half of the gear drive). The part being cut is steel, 1 3/4″ diameter. The cutter is HSS. This is a finishing cut.

LOT 11 OF 4 CARBIDE TIP TIPPED CUTTER TOOL BIT CUTTING FOR METAL LATHE TOOLING
US $4.99
End Date: Sunday May-20-2012 17:54:28 PDT
Buy It Now for only: US $4.99
Buy it now | Add to watch list
]]> http://usedmetallathe.net/hendey-tg-lathe-cutting-the-base-of-a-bevel-gear-blank-4/feed 1 Hendey T&G Lathe, cutting the base of a bevel gear blank http://usedmetallathe.net/hendey-tg-lathe-cutting-the-base-of-a-bevel-gear-blank-3 http://usedmetallathe.net/hendey-tg-lathe-cutting-the-base-of-a-bevel-gear-blank-3#comments Sat, 31 Dec 2011 18:10:33 +0000 http://usedmetallathe.net/hendey-tg-lathe-cutting-the-base-of-a-bevel-gear-blank-3 Cool video about lathe cutting, take a look: Cutting the base of a Bevel gear blank (must be very flat), on a Hendey tool & gagemakers lathe. The blank is held in a 3 jaw cushman chuck, & supported by the steady rest. The lathe speed is running about 300 rpm (in 2nd back gear), [...]]]>
Cool video about lathe cutting, take a look:


Cutting the base of a Bevel gear blank (must be very flat), on a Hendey tool & gagemakers lathe. The blank is held in a 3 jaw cushman chuck, & supported by the steady rest. The lathe speed is running about 300 rpm (in 2nd back gear), with a crossfeed of .001 (set to .002, but in belt drive, which is half of the gear drive). The part being cut is steel, 1 3/4″ diameter. The cutter is HSS. This is a finishing cut.

45deg + 90 deg + round carbide insert cutting tools for wood lathe turning work
US $99.95 (0 Bid)
End Date: Sunday May-20-2012 17:00:36 PDT
Buy It Now for only: US $130.00
Bid now | Buy it now | Add to watch list
]]> http://usedmetallathe.net/hendey-tg-lathe-cutting-the-base-of-a-bevel-gear-blank-3/feed 1 Bolton Tools 12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value ! http://usedmetallathe.net/bolton-tools-12-x-30-metal-lathemill-drill-combo-gear-driven-1-12-hp-lathe-motor-34-hp-mill-motor-110-or-220-volt-set-up-ships-with-standard-accessories-full-1-year-warrantty-excell-9 http://usedmetallathe.net/bolton-tools-12-x-30-metal-lathemill-drill-combo-gear-driven-1-12-hp-lathe-motor-34-hp-mill-motor-110-or-220-volt-set-up-ships-with-standard-accessories-full-1-year-warrantty-excell-9#comments Thu, 08 Dec 2011 17:37:34 +0000 http://usedmetallathe.net/bolton-tools-12-x-30-metal-lathemill-drill-combo-gear-driven-1-12-hp-lathe-motor-34-hp-mill-motor-110-or-220-volt-set-up-ships-with-standard-accessories-full-1-year-warrantty-excell-9 Bolton Tools 12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value ! Price:$3,139.50 Geared Combination Lathe/Mill drill , precision & accuracy on this large 12″ swing over bed, 30″ [...]]]>


HP Agilent 07004-40110 Corner Bead Metal lath R RT NEW
US $39.95
End Date: Saturday May-19-2012 6:52:41 PDT
Buy It Now for only: US $39.95
Buy it now | Add to watch list

Bolton Tools 12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value !
Price:$3,139.50

  • Geared Combination Lathe/Mill drill , precision & accuracy on this large 12″ swing over bed, 30″ distance between centers, 12 speeds 75-1900 RPM , 1 1/2″ spindle bore

Bolton Tools 12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value !
Product Description
Spindle Bore: 1-1/2″
Spindle Speeds:12 (60-1600 RPM/50Hz) or (75-1900RPM/60Hz)
Swing over work table: 6-7/10″
Thread pitch on processing: 9-48 1/n”
Thread kinds on processing: 23.
Tailstock Taper: MT3#
X-Axis Working Travel:23-3/5″
Y-Axis Working Travel: 6″
Mill/Drill Specifications:
Head Rotation: 360 degree ;Head Travel:7″.
Spindle Center to Support Column:12-1/8″.
Spindle to Table Distance(Min-Max):4-3/4-11-4/5″.
Spindle Speeds: 4(220-2620RPM/50Hz)or(240-2700RPM/… More >>
Bolton Tools 12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value !

Genuine Aloris Metal Lathe Tool Post CA Wedge + 4 Tool Holders + Inserts
US $695.00 (1 Bid)
End Date: Saturday May-19-2012 18:48:01 PDT
Bid now | Add to watch list

Bolton Tools 12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value !

]]> http://usedmetallathe.net/bolton-tools-12-x-30-metal-lathemill-drill-combo-gear-driven-1-12-hp-lathe-motor-34-hp-mill-motor-110-or-220-volt-set-up-ships-with-standard-accessories-full-1-year-warrantty-excell-9/feed 0 Hendey T&G Lathe, cutting the base of a bevel gear blank http://usedmetallathe.net/hendey-tg-lathe-cutting-the-base-of-a-bevel-gear-blank-2 http://usedmetallathe.net/hendey-tg-lathe-cutting-the-base-of-a-bevel-gear-blank-2#comments Sat, 19 Nov 2011 18:09:05 +0000 http://usedmetallathe.net/hendey-tg-lathe-cutting-the-base-of-a-bevel-gear-blank-2 Cool video about lathe cutting, take a look: Cutting the base of a Bevel gear blank (must be very flat), on a Hendey tool & gagemakers lathe. The blank is held in a 3 jaw cushman chuck, & supported by the steady rest. The lathe speed is running about 300 rpm (in 2nd back gear), [...]]]>
American broach arbor production bearing press cnc tool lath mill weld cutting
US $1,800.00
End Date: Sunday May-20-2012 16:56:26 PDT
Buy It Now for only: US $1,800.00
Buy it now | Add to watch list

Cool video about lathe cutting, take a look:


Cutting the base of a Bevel gear blank (must be very flat), on a Hendey tool & gagemakers lathe. The blank is held in a 3 jaw cushman chuck, & supported by the steady rest. The lathe speed is running about 300 rpm (in 2nd back gear), with a crossfeed of .001 (set to .002, but in belt drive, which is half of the gear drive). The part being cut is steel, 1 3/4″ diameter. The cutter is HSS. This is a finishing cut.

LOT 11 OF 4 CARBIDE TIP TIPPED CUTTER TOOL BIT CUTTING FOR METAL LATHE TOOLING
US $4.99
End Date: Sunday May-20-2012 17:54:28 PDT
Buy It Now for only: US $4.99
Buy it now | Add to watch list
]]> http://usedmetallathe.net/hendey-tg-lathe-cutting-the-base-of-a-bevel-gear-blank-2/feed 1 South Bend Bull Gear W / Pin Fits 9″ or 10 Lite Metal Lathe http://usedmetallathe.net/south-bend-bull-gear-w-pin-fits-9-or-10-lite-metal-lathe http://usedmetallathe.net/south-bend-bull-gear-w-pin-fits-9-or-10-lite-metal-lathe#comments Thu, 10 Nov 2011 17:36:40 +0000 http://usedmetallathe.net/south-bend-bull-gear-w-pin-fits-9-or-10-lite-metal-lathe South Bend Bull Gear W / Pin Fits 9″ or 10 Lite Metal Lathe Product DescriptionIf you need more torque and power, this bull gear it the right gear. The bull gear is excellent for the power you need for the stronger metals to cut…. More >> South Bend Bull Gear W / Pin Fits [...]]]>


New Digital Photo Tachometer Tool for Wood Metal Lathe
US $17.55 (0 Bid)
End Date: Saturday May-19-2012 19:02:53 PDT
Buy It Now for only: US $19.55
Bid now | Buy it now | Add to watch list

South Bend Bull Gear W / Pin Fits 9″ or 10 Lite Metal Lathe
Price:

  • South Bend Bull Gear W / Pin
  • All Teeth are Present
  • Good Condition – used

South Bend Bull Gear W / Pin Fits 9″ or 10 Lite Metal Lathe
Product Description
If you need more torque and power, this bull gear it the right gear. The bull gear is excellent for the power you need for the stronger metals to cut…. More >>
South Bend Bull Gear W / Pin Fits 9″ or 10 Lite Metal Lathe

1948 AD LaBlond Heavy Duty Engine Metal Lathe 12" - 32"
US $12.99
End Date: Saturday May-19-2012 8:09:29 PDT
Buy It Now for only: US $12.99
Buy it now | Add to watch list

South Bend Bull Gear W / Pin Fits 9″ or 10 Lite Metal Lathe

]]> http://usedmetallathe.net/south-bend-bull-gear-w-pin-fits-9-or-10-lite-metal-lathe/feed 0 Bolton Tools 12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value ! http://usedmetallathe.net/bolton-tools-12-x-30-metal-lathemill-drill-combo-gear-driven-1-12-hp-lathe-motor-34-hp-mill-motor-110-or-220-volt-set-up-ships-with-standard-accessories-full-1-year-warrantty-excell-8 http://usedmetallathe.net/bolton-tools-12-x-30-metal-lathemill-drill-combo-gear-driven-1-12-hp-lathe-motor-34-hp-mill-motor-110-or-220-volt-set-up-ships-with-standard-accessories-full-1-year-warrantty-excell-8#comments Tue, 25 Oct 2011 17:36:12 +0000 http://usedmetallathe.net/bolton-tools-12-x-30-metal-lathemill-drill-combo-gear-driven-1-12-hp-lathe-motor-34-hp-mill-motor-110-or-220-volt-set-up-ships-with-standard-accessories-full-1-year-warrantty-excell-8 Bolton Tools 12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value ! Price:$3,139.50 Geared Combination Lathe/Mill drill , precision & accuracy on this large 12″ swing over bed, 30″ [...]]]>


Yuasa Metal Lathe (14"x40")
US $3,650.00 (0 Bid)
End Date: Sunday May-20-2012 13:04:35 PDT
Bid now | Add to watch list

Bolton Tools 12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value !
Price:$3,139.50

  • Geared Combination Lathe/Mill drill , precision & accuracy on this large 12″ swing over bed, 30″ distance between centers, 12 speeds 75-1900 RPM , 1 1/2″ spindle bore

Bolton Tools 12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value !
Product Description
Spindle Bore: 1-1/2″
Spindle Speeds:12 (60-1600 RPM/50Hz) or (75-1900RPM/60Hz)
Swing over work table: 6-7/10″
Thread pitch on processing: 9-48 1/n”
Thread kinds on processing: 23.
Tailstock Taper: MT3#
X-Axis Working Travel:23-3/5″
Y-Axis Working Travel: 6″
Mill/Drill Specifications:
Head Rotation: 360 degree ;Head Travel:7″.
Spindle Center to Support Column:12-1/8″.
Spindle to Table Distance(Min-Max):4-3/4-11-4/5″.
Spindle Speeds: 4(220-2620RPM/50Hz)or(240-2700RPM/… More >>
Bolton Tools 12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value !

lathe unitmat emmco metal cutting
US $40.00 (1 Bid)
End Date: Saturday May-19-2012 13:14:00 PDT
Bid now | Add to watch list

Bolton Tools 12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value !

]]> http://usedmetallathe.net/bolton-tools-12-x-30-metal-lathemill-drill-combo-gear-driven-1-12-hp-lathe-motor-34-hp-mill-motor-110-or-220-volt-set-up-ships-with-standard-accessories-full-1-year-warrantty-excell-8/feed 0 Bolton Tools 12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value ! http://usedmetallathe.net/bolton-tools-12-x-30-metal-lathemill-drill-combo-gear-driven-1-12-hp-lathe-motor-34-hp-mill-motor-110-or-220-volt-set-up-ships-with-standard-accessories-full-1-year-warrantty-excell-7 http://usedmetallathe.net/bolton-tools-12-x-30-metal-lathemill-drill-combo-gear-driven-1-12-hp-lathe-motor-34-hp-mill-motor-110-or-220-volt-set-up-ships-with-standard-accessories-full-1-year-warrantty-excell-7#comments Fri, 21 Oct 2011 17:34:48 +0000 http://usedmetallathe.net/bolton-tools-12-x-30-metal-lathemill-drill-combo-gear-driven-1-12-hp-lathe-motor-34-hp-mill-motor-110-or-220-volt-set-up-ships-with-standard-accessories-full-1-year-warrantty-excell-7 Bolton Tools 12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value ! Price:$3,139.50 Geared Combination Lathe/Mill drill , precision & accuracy on this large 12″ swing over bed, 30″ [...]]]>


PHASE CONVERTER PLANS for DRILL PRESS & METAL LATHE
US $8.96 (0 Bid)
End Date: Sunday May-20-2012 12:50:33 PDT
Bid now | Add to watch list

Bolton Tools 12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value !
Price:$3,139.50

  • Geared Combination Lathe/Mill drill , precision & accuracy on this large 12″ swing over bed, 30″ distance between centers, 12 speeds 75-1900 RPM , 1 1/2″ spindle bore

Bolton Tools 12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value !
Product Description
Spindle Bore: 1-1/2″
Spindle Speeds:12 (60-1600 RPM/50Hz) or (75-1900RPM/60Hz)
Swing over work table: 6-7/10″
Thread pitch on processing: 9-48 1/n”
Thread kinds on processing: 23.
Tailstock Taper: MT3#
X-Axis Working Travel:23-3/5″
Y-Axis Working Travel: 6″
Mill/Drill Specifications:
Head Rotation: 360 degree ;Head Travel:7″.
Spindle Center to Support Column:12-1/8″.
Spindle to Table Distance(Min-Max):4-3/4-11-4/5″.
Spindle Speeds: 4(220-2620RPM/50Hz)or(240-2700RPM/… More >>
Bolton Tools 12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value !

New Digital Photo Tachometer Tool for Wood Metal Lathe
US $17.55 (0 Bid)
End Date: Saturday May-19-2012 18:09:08 PDT
Buy It Now for only: US $19.55
Bid now | Buy it now | Add to watch list

Bolton Tools 12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value !

]]> http://usedmetallathe.net/bolton-tools-12-x-30-metal-lathemill-drill-combo-gear-driven-1-12-hp-lathe-motor-34-hp-mill-motor-110-or-220-volt-set-up-ships-with-standard-accessories-full-1-year-warrantty-excell-7/feed 0 Bolton Tools 12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value ! http://usedmetallathe.net/bolton-tools-12-x-30-metal-lathemill-drill-combo-gear-driven-1-12-hp-lathe-motor-34-hp-mill-motor-110-or-220-volt-set-up-ships-with-standard-accessories-full-1-year-warrantty-excell-6 http://usedmetallathe.net/bolton-tools-12-x-30-metal-lathemill-drill-combo-gear-driven-1-12-hp-lathe-motor-34-hp-mill-motor-110-or-220-volt-set-up-ships-with-standard-accessories-full-1-year-warrantty-excell-6#comments Sat, 15 Oct 2011 17:40:35 +0000 http://usedmetallathe.net/bolton-tools-12-x-30-metal-lathemill-drill-combo-gear-driven-1-12-hp-lathe-motor-34-hp-mill-motor-110-or-220-volt-set-up-ships-with-standard-accessories-full-1-year-warrantty-excell-6 Bolton Tools 12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value ! Price:$3,139.50 Geared Combination Lathe/Mill drill , precision & accuracy on this large 12″ swing over bed, 30″ [...]]]>


500 #8 x 1" Self Drilling Phillips K-Lath Wafer Head Screws, Sheet Metal, Wood
US $14.99
End Date: Saturday May-19-2012 1:48:29 PDT
Buy It Now for only: US $14.99
Buy it now | Add to watch list

Bolton Tools 12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value !
Price:$3,139.50

  • Geared Combination Lathe/Mill drill , precision & accuracy on this large 12″ swing over bed, 30″ distance between centers, 12 speeds 75-1900 RPM , 1 1/2″ spindle bore

Bolton Tools 12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value !
Product Description
Spindle Bore: 1-1/2″
Spindle Speeds:12 (60-1600 RPM/50Hz) or (75-1900RPM/60Hz)
Swing over work table: 6-7/10″
Thread pitch on processing: 9-48 1/n”
Thread kinds on processing: 23.
Tailstock Taper: MT3#
X-Axis Working Travel:23-3/5″
Y-Axis Working Travel: 6″
Mill/Drill Specifications:
Head Rotation: 360 degree ;Head Travel:7″.
Spindle Center to Support Column:12-1/8″.
Spindle to Table Distance(Min-Max):4-3/4-11-4/5″.
Spindle Speeds: 4(220-2620RPM/50Hz)or(240-2700RPM/… More >>
Bolton Tools 12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value !

FREE SHIPPING-JET ZX Metal Lathe-14 x 40 #321910
US $16,499.99
End Date: Saturday May-19-2012 9:36:05 PDT
Buy It Now for only: US $16,499.99
Buy it now | Add to watch list

Bolton Tools 12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value !

]]> http://usedmetallathe.net/bolton-tools-12-x-30-metal-lathemill-drill-combo-gear-driven-1-12-hp-lathe-motor-34-hp-mill-motor-110-or-220-volt-set-up-ships-with-standard-accessories-full-1-year-warrantty-excell-6/feed 0 Bolton Tools 12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value ! http://usedmetallathe.net/bolton-tools-12-x-30-metal-lathemill-drill-combo-gear-driven-1-12-hp-lathe-motor-34-hp-mill-motor-110-or-220-volt-set-up-ships-with-standard-accessories-full-1-year-warrantty-excell-5 http://usedmetallathe.net/bolton-tools-12-x-30-metal-lathemill-drill-combo-gear-driven-1-12-hp-lathe-motor-34-hp-mill-motor-110-or-220-volt-set-up-ships-with-standard-accessories-full-1-year-warrantty-excell-5#comments Fri, 09 Sep 2011 17:36:25 +0000 http://usedmetallathe.net/bolton-tools-12-x-30-metal-lathemill-drill-combo-gear-driven-1-12-hp-lathe-motor-34-hp-mill-motor-110-or-220-volt-set-up-ships-with-standard-accessories-full-1-year-warrantty-excell-5 Bolton Tools 12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value ! Price:$3,139.50 Geared Combination Lathe/Mill drill , precision & accuracy on this large 12″ swing over bed, 30″ [...]]]>


MORSE TAPER 2 MT2 METAL LATHE DEAD CENTER SOUTH BEND ATLAS LOGAN
US $19.95
End Date: Saturday May-19-2012 6:59:25 PDT
Buy It Now for only: US $19.95
Buy it now | Add to watch list

Bolton Tools 12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value !
Price:$3,139.50

  • Geared Combination Lathe/Mill drill , precision & accuracy on this large 12″ swing over bed, 30″ distance between centers, 12 speeds 75-1900 RPM , 1 1/2″ spindle bore

Bolton Tools 12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value !
Product Description
Spindle Bore: 1-1/2″
Spindle Speeds:12 (60-1600 RPM/50Hz) or (75-1900RPM/60Hz)
Swing over work table: 6-7/10″
Thread pitch on processing: 9-48 1/n”
Thread kinds on processing: 23.
Tailstock Taper: MT3#
X-Axis Working Travel:23-3/5″
Y-Axis Working Travel: 6″
Mill/Drill Specifications:
Head Rotation: 360 degree ;Head Travel:7″.
Spindle Center to Support Column:12-1/8″.
Spindle to Table Distance(Min-Max):4-3/4-11-4/5″.
Spindle Speeds: 4(220-2620RPM/50Hz)or(240-2700RPM/… More >>
Bolton Tools 12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value !


Bolton Tools 12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value !

]]> http://usedmetallathe.net/bolton-tools-12-x-30-metal-lathemill-drill-combo-gear-driven-1-12-hp-lathe-motor-34-hp-mill-motor-110-or-220-volt-set-up-ships-with-standard-accessories-full-1-year-warrantty-excell-5/feed 0 Bolton Tools 12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value ! http://usedmetallathe.net/bolton-tools-12-x-30-metal-lathemill-drill-combo-gear-driven-1-12-hp-lathe-motor-34-hp-mill-motor-110-or-220-volt-set-up-ships-with-standard-accessories-full-1-year-warrantty-excell-4 http://usedmetallathe.net/bolton-tools-12-x-30-metal-lathemill-drill-combo-gear-driven-1-12-hp-lathe-motor-34-hp-mill-motor-110-or-220-volt-set-up-ships-with-standard-accessories-full-1-year-warrantty-excell-4#comments Sun, 19 Jun 2011 17:35:23 +0000 http://usedmetallathe.net/bolton-tools-12-x-30-metal-lathemill-drill-combo-gear-driven-1-12-hp-lathe-motor-34-hp-mill-motor-110-or-220-volt-set-up-ships-with-standard-accessories-full-1-year-warrantty-excell-4 Bolton Tools 12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value ! Price:$3,139.50 Geared Combination Lathe/Mill drill , precision & accuracy on this large 12″ swing over bed, 30″ [...]]]>


Craftsman 101 Metal Lathe Manual Maintenance, Parts
US $24.95
End Date: Sunday May-20-2012 8:06:40 PDT
Buy It Now for only: US $24.95
Buy it now | Add to watch list

Bolton Tools 12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value !
Price:$3,139.50

  • Geared Combination Lathe/Mill drill , precision & accuracy on this large 12″ swing over bed, 30″ distance between centers, 12 speeds 75-1900 RPM , 1 1/2″ spindle bore

Bolton Tools 12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value !
Product Description
Spindle Bore: 1-1/2″
Spindle Speeds:12 (60-1600 RPM/50Hz) or (75-1900RPM/60Hz)
Swing over work table: 6-7/10″
Thread pitch on processing: 9-48 1/n”
Thread kinds on processing: 23.
Tailstock Taper: MT3#
X-Axis Working Travel:23-3/5″
Y-Axis Working Travel: 6″
Mill/Drill Specifications:
Head Rotation: 360 degree ;Head Travel:7″.
Spindle Center to Support Column:12-1/8″.
Spindle to Table Distance(Min-Max):4-3/4-11-4/5″.
Spindle Speeds: 4(220-2620RPM/50Hz)or(240-2700RPM/… More >>
Bolton Tools 12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value !

FREE SHIPPING-JET ZX Metal Lathe-22 x 80 #321980
US $21,999.99
End Date: Saturday May-19-2012 9:56:07 PDT
Buy It Now for only: US $21,999.99
Buy it now | Add to watch list

Bolton Tools 12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value !

]]> http://usedmetallathe.net/bolton-tools-12-x-30-metal-lathemill-drill-combo-gear-driven-1-12-hp-lathe-motor-34-hp-mill-motor-110-or-220-volt-set-up-ships-with-standard-accessories-full-1-year-warrantty-excell-4/feed 0