GTV-27 Gang-Tool Lathe Steel Cutting Demo
Cool video about lathe cutting, take a look: GTV-27 cutting steel featuring threading, side drilling, and side milling
Lapping Cross & Compound Slide Lathe Ways
Cool video about jewelers lathe, take a look: Using the Mike Taglieri Procedure from mini-lathe.com to lap the ways of the cross slide and compound slide on my 7×14 MicroMark Mini-Lathe (instructions: www.mini-lathe.com ) Check out www.nyccnc.com for more!
1.3 Machine Tool Basics — Lathe Cutting Tools — SMITHY GRANITE 3-in-1
Cool video about lathe cutting, take a look: www.smithy.com (view transcription of video below) Learn about the basics of metal lathe operations using our Smithy Granite combo lathe machines. You can visit us at www.smithy.com for more information or send us any questions about your project. Our trained technicians will be glad to help you [...]
Can I use a drum/rotor lathe to shave my rim faces?
So I have 2 piece welded rims I am taking apart and converting into a 3 piece. The problem is, the back of the surface isn’t smooth enough to mount on my innr barrel. Therefore, I have a decent fairly expensive looking rotor cutting machine/lathe at my shop that I was wondering if I could [...]
How to Make a Brass Container on a Metal Lathe – Kevin Caron
Cool video about metal lathe, take a look: Artist Kevin Caron shows how to make a brass container and its top on a metal lathe and talks about working with brass versus aluminum and what he does with the scrap.
Do Metric threads on A Lathe Specs go by pitch or total length in mm?
I need to thread a muzzle break on an HK Barrel and its 16mm x 1.0 pitch Right Hand.. The lathe my friend has shows it cuts 29 metric threads in the range of 0.2-4.5mm. I know threads by TPI per/inch, but do these metric specs refer to length or Thread Pitch in mm?
e-kycz.com: L&R Lathe Motor for watchmakers and jewelers
Cool video about jewelers lathe, take a look: Best viewed in High Quality. Visit e-kycz.com for more Watchmaking related tools. This is on sale on eBay userID e-kycz Thanks for viewing
Explanation: Cutting Threads on My Metal Lathe
Cool video about lathe cutting, take a look: Here I describe in detail the steps I took to cut threads in an aluminum rod on my metal lathe. I was creating a tool holder to hold a small Dremel chuck, meaning that I had to duplicate the shaft of a Dremel tool on my own [...]
Hendey T&G Lathe, cutting the base of a bevel gear blank
Cool video about lathe cutting, take a look: Cutting the base of a Bevel gear blank (must be very flat), on a Hendey tool & gagemakers lathe. The blank is held in a 3 jaw cushman chuck, & supported by the steady rest. The lathe speed is running about 300 rpm (in 2nd back gear), [...]
Lapping Cross & Compound Slide Lathe Ways
Cool video about jewelers lathe, take a look: Using the Mike Taglieri Procedure from mini-lathe.com to lap the ways of the cross slide and compound slide on my 7×14 MicroMark Mini-Lathe (instructions: www.mini-lathe.com ) Check out www.nyccnc.com for more!
