How to Make a Brass Container on a Metal Lathe – Kevin Caron
Cool video about metal lathe, take a look: Artist Kevin Caron shows how to make a brass container and its top on a metal lathe and talks about working with brass versus aluminum and what he does with the scrap.
Explanation: Cutting Threads on My Metal Lathe
Cool video about lathe cutting, take a look: Here I describe in detail the steps I took to cut threads in an aluminum rod on my metal lathe. I was creating a tool holder to hold a small Dremel chuck, meaning that I had to duplicate the shaft of a Dremel tool on my own [...]
Bolton Tools 12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value !
Bolton Tools 12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value ! Price:$3,139.50 Geared Combination Lathe/Mill drill , precision & accuracy on this large 12″ swing over bed, 30″ [...]
Shop Fox M1019 13-Inch by 40-Inch Metal Lathe
Shop Fox M1019 13-Inch by 40-Inch Metal Lathe Price:$3,799.99 Swing over bed: 13-1/2-Inch, Swing over gap: 19-Inch, Swing over cross slide: 8-Inch, Bed width: 7-3/8-Inch Range of speeds: 78, 128, 210, 330, 510, 830, 1360, 2100 RPM Spindle nose: D1-4 Camlock, Spindle nose taper: MT #5, Spindle bore: 1-7/16-Inch Jog button and emergency stop Induction [...]
1874 DWPOND metal lathe
Cool video about metal lathe, take a look: 1874 DWPOND metal lathe
Lathe Bit Centering Tool Gen 2 for Metal Hobby or South Bend lathe
Lathe Bit Centering Tool Gen 2 for Metal Hobby or South Bend lathe Price:$24.95 Pocket Sized Lathe Bit Centering tool Accurately and Quickly align a lathe cutting tool tip Made in USA Machined from a solid block of aluminum for extreme precision Mil-Spec Hardcoat Anodize Finish will last for many years Lathe Bit Centering Tool [...]
Metal Lathe Parting Hex Bar
Cool video about metal lathe, take a look: Parting off some 1″ hex bar for a job i’m doing. Machine is running at 600rpm, start with manual feed, then switch to auto feed. Parting tool is Taegutec with carbide insert.
South Bend Bull Gear W / Pin Fits 9″ or 10 Lite Metal Lathe
South Bend Bull Gear W / Pin Fits 9″ or 10 Lite Metal Lathe Product DescriptionIf you need more torque and power, this bull gear it the right gear. The bull gear is excellent for the power you need for the stronger metals to cut…. More >> South Bend Bull Gear W / Pin Fits [...]
Bolton Tools 12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value !
Bolton Tools 12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value ! Price:$3,139.50 Geared Combination Lathe/Mill drill , precision & accuracy on this large 12″ swing over bed, 30″ [...]
Bolton Tools 12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value !
Bolton Tools 12″ X 30″ Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value ! Price:$3,139.50 Geared Combination Lathe/Mill drill , precision & accuracy on this large 12″ swing over bed, 30″ [...]
